Kondisi bagus, normal dan mulus.
Keterangan lihat di bawah:
LV 5100D Digital / Analog Component Waveform Monitor
GENERAL
The LV 5100D is a Component Digital/Analog Waveform Monitor for the 525/60 and 625/50 systems. It accommodates both digital and analog, and features two component serial digital inputs and a single 3-channel component analog input that allows you to make use of your existing video sources and is ideal for mixed digital/analog systems. At the digital inputs, an EDH measurement function enables transmission error monitoring and analysis. By using the equivalent cable length measurement function, it is possible to check signal strength in a form that is intuitively understandable.
The LV 5100D also boasts a full range of analog component waveform monitor functions, including a picture monitor output for TV picture display of a video signal, a line selector function with a high-intensity CRT, and settings from a menu screen.
The LV 5100D also boasts a full range of analog component waveform monitor functions, including a picture monitor output for TV picture display of a video signal, a line selector function with a high-intensity CRT, and settings from a menu screen.
FEATURES
- Two sets of serial digital inputs and output
Two sets of serial digital passive through inputs conforming to ITU-R656-1 and SMPTE 259M standards are provided, in addition to an active output which provides re-transmission of either of these inputs. - Component analog inputs (Y, Cb, Cr, or GBR) By providing component analog inputs, it is possible to use the LV 5100D in mixed digital/analog applications.
- Analog picture monitor output
The LV 5100D features an analog picture monitor output which outputs a serial digital video signal in either GBR format or Y, Cb, Cr format. - Picture display function
A picture display function is provided, enabling display of the Y or G video signal as a TV image on the CRT. When using the line selector, a selected line of the image is displayed with intensity modulation, a convenient feature in checking the positional relationship between a video signal and the picture. - Vector display function
Vector display is possible of both digital and analog signals. - Equivalent cable length measurement function
The strength of a signal connected to the serial digital input can be measured and displayed as an equivalent length of 5C-2V coaxial cable. - EDH measurement function
It is possible to monitor serial transmission error by means of EDH codes. - Data dump function
Displays arbitrary line of digital data in hexadecimal notation. - Cursor measurement functions
Level measurements are possible by using cursor lines. - Stereo sound X-Y display function
An analog stereo signal can be displayed in X-Y mode. - Preset function
Panel switch settings, including vertical and horizontal position settings can be stored in memory, enabling often-used measurement conditions to be stored for quick recall from either the front panel or remotely.
